The Fogmaster Noz-L-Jet(TM) 7807 fogger features a hose and wand
with discharge control. Lightweight and portable, it allows "spot"
fogging without filling the room or wasting chemical.
|
Fogmaster
Noz-L-Jet(TM) 7807
$540.00 / Free Shipping
|
 With
output control for "spot" fogging
the fogmaster Noz-L-Jet(tm) 7807 fogger features a hose and wand
with discharge control. Lightweight and portable, it allows "spot"
fogging without filling the room or wasting chemical.
When you want fog, just aim the nozzle and press the thumb valve.
It's spring loaded for one-handed operation, but can be latched
"on" if you want continuous output. No matter what your
task, the Noz-L-Jet's powerful 30 cfm blower makes it quick work.
A separate regulating valve in the power head controls droplet size
in the discharge stream. Open up the valve for large mist droplets
which settle quickly. Turn it down for small fog particles with
longer float times and better penetration.
First developed to apply germicides to air-conditioning ducts, the
7807 has proven useful for other "directed fog" applications
including removing smoke odors from draperies and upholstery, applying
anti-mildew chemicals beneath carpets, and pest control in restaurants
and commercial kitchens (treating wall voids, above ceilings and
under appliances without filling the room with fog).
Specifications |
| Motor |
1
hp., 120vac 50/60hz, 7 amp
Optional: 240vac. 3.5 amp |
| Fogging
nozzle |
High
shear, counter-rotating vortex design |
| Range
& size |
Visible
fog 20-30 feet from end of wand 10-30 micron vmd (dry fog to
heavy wet mist) |
| Liquid
flow control |
On/off
toggle valve on wand
0-10 oz/min [0-300 ml/min]
one turn control valve |
| Tank
capacity |
1
gallon [4 liters] |
| Materials
of contruction |
Power
head housing and tank - aluminum
tubing - fuel and oil resistant vinyl
fittings and control valve - brass
hose & wand - vinyl and aluminum
nozzle - Celcon |
| Dimensions |
H
x L x Dia:
15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Hose: 36"; wand: 38" long curved or 16" short
straight |
| Shipping
weight |
17
pounds, in 2 cartons |
| Warranty |
Five
year warranty |
|
Micro-Jet
ULV 74017
$525.00 / Free Shipping
|
 Versatile
Ultra Low Volume Fogger
The Fogmaster Micro-Jet ULV® 7401 fogger allows precise adjustment
of particle size, under 7 micron VMD, for ultra low volume application.
This allows use of more concentrated fogging solutions, and speeds
up treatment time -- at typical ULV application rates, the Micro-Jet
covers 2-4,000 cubic feet per minute.)
A 10-turn precision needle valve controls liquid output and droplet
size. Set the valve to a low flow rate to produce near-invisible
ULV droplets.. For heavier fogs and mists, Increase the flow rate.
Once the valve has been set, you can use the vernier calibration
to return to the same setting, or snap a lock ring to prevent
accidental changes.
Chemical flow rate is easily calibrated in the field to adjust
for differences in liquid density, viscosity or surface tension.
And since the Micro-Jet handles both water- and oil-based liquids,
this one machine can satisfy all your fogging requirements.
The Micro-Jet ULV is widely used in schools, restaurants, zoos,
barns, hotels, and similar locations requiring professional application.
Light-weight, and supported by our five-year limited warranty,
the Fogmaster Micro-Jet ULV is an outstanding choice.
Specifications |
| Motor |
1
Hp, 120VAC 50/60Hz, 7 amp [optional: 240V, 3.5 amp] |
| Fogging
Nozzle |
High-shear,
counter-rotating vortex design |
| Particle
Size |
7-
30 micron VMD, adjustable
(ultra fine, dry fog to heavy, wet fog) |
| Liquid
Flow Rate |
0-10
oz/min [0-300 ml/min]
Nine turn vernier valve
Valve lock feature |
| Chemicals |
Water-
and oil-based solutions |
| Tank
Capacity |
1
gallon [4 liters] |
Materials
of
Construction |
Power
head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings - brass
Control valve
- glass filled nylon, stainless stem, Viton® seal
Nozzle - Celcon¨ acetyl copolymer |
| Options |
Stainless
steel fittings Tank with float valve (brass; 1/4" compression
fitting) Stainless steel tank (avail Q2 2003) |
| Dimensions |
H
x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm] |
| Shipping
Weight |
12
pounds [6 kg] |
| Warranty
Period |
Five
years |
|
Fogmaster
Jr 5330
$140.00
/ Free Shipping
|
 Small
general utility fogger, the Jr 5330 is constructed of corrosion
resistant materials and offered in 120 and 240vac models. When a
smaller or less expensive fogger is needed, consider the junior.
Among its many uses are:
• Car detailing
• Rental car turnarounds
• Hotel room smoke odors
• Treat pet stains and odors
• Control flying insects on patios and lawns
• Apply soap solutions to gardens
• Mist cut flowers and interior foliage
• Apply waxes and shines
• Soften leather
• Apply preservatives and lubricants
• Raise humidity in coolers.
It's easy to use. Twist the power head to detach the tank and
pour in your solution. Another half twist and you're ready to
go. Switch on the handle to run. Adjust output size, from a fine
light fog to a coarse mist, with the rotary valve.
The Jr -- for those "in between" jobs -- too small for
an industrial unit, too large for a trigger sprayer or pump-up.
Specifications |
| Motor |
1/4
hp, 120vac 50/60 hz, 3 amp; 240vac, 1.5 amp |
| Liquid
capacity |
One
quart [950 ml] |
| Chemicals |
Any
lightweight liquid. Nozzles can atomize both oil-based and
water-based fluids |
| Particle
size |
15-40
microns, adjustable |
| Discharge
rate |
0-4
oz [120 ml] /min, adjustable |
| Materials
of contruction |
Nozzle
and housing - nylon
tank - polyethylene
tubing - fuel and oil resistant vinyl
fittings - brass |
| Dimensions |
Height:
10 in [25 cm]
Width: 4.5 in [11 cm]
Length: 11 in [28 cm] |
| Shipping
weight |
5
lb [2 kg] for single unit quantity |
| Packaging |
Single
unit cases: 6, 12 and 18 units
pallet: 105 units |
| Warranty |
One
year limited warranty |
|
Sentinel
II 5500 with transfer pump
$1221.00
/ Free Shipping
|
|
 Two
nozzle fogging power head designed for odor control, and for simple,
low-cost installation. It only takes three steps: attach the weatherproof
enclosure to a wall, ceiling or post. Connect the liquid feed line
(low pressure, 3/16" ID tubing). Plug into an electrical outlet.
Your power head is ready to operate.
No control wiring is needed. The power head activates when it senses
liquid feed. And since the liquid supply operates at low pressure
(10-60 psi), there is no investment in piping. If your needs change,
relocate heads, or add more. Just connect to the liquid supply and
plug in.
There are many ways to control system operation -- a manual valve
on the supply line, a repeat cycle timer, an odor monitor, weather
station or any other device able to trigger a relay. Liquid can
be supplied by a small transfer pump or a solenoid valve to the
house water supply. Because power heads respond to liquid feed pressure,
you can control individual units with simple toggle valves in their
feed lines. And it's easy to construct more elaborate control systems
with timers, solenoid valves or condition sensors.
Specifications |
| Motor |
1
hp, 120vac 50/60hz, 10 amp; optional: 240vac, 5 amp
motor saver brush standard. 9 ft 18/3 power cord |
| Blower |
Tangential
discharge. Two stage balanced fan, 60 cfm, 20,000 no load rpm.
|
| Nozzle
technology |
Counter-rotating
vortex design. High turbulence in nozzle shears feed liquid
into fog-sized droplets (7-30 micron vmd). Droplet size distribution
is influenced by liquid viscosity, surface tension, density
and feed rate |
| Nozzles |
Two.
Non-clogging design (no small orifices)
Fully adjustable angle and discharge direction |
| Chemicals |
Any
lightweight liquid. Nozzles can atomize both oil-based and water-based
fluids |
| Particle
size |
7-30
µ, adjustable |
| Control
valve |
Nine
turn Vernier w/ memory lock
Glass filled nylon w/ stainless stem and seat, viton® seals
|
| Discharge
rate |
0-20
oz [600 ml] /min, adjustable |
| Intake
filter |
Serviceable
air cleaner |
| Materials
of contruction |
Enclosure
- Nema 4 (weathertight, corrosion resistant) fiberglass w/ stainless
hardware
Nozzle housing - corrosion resistant vinyl w/ stainless clamps
Tubing - fuel and oil resistant vinyl
Fittings - brass, acetal
Nozzle - Celcon® |
| Dimensions |
Height:
(incl filter): 28 in [71 cm]
Width: (enclosure only): 14 in [36 cm]
Width: (max nozzle extension): 34 in [86 cm]
Depth: 8.8 in [22 cm] |
| Shipping
weight |
30
lb [14 kg] |
| Packaging |
Single
unit cases: 6, 12 and 18 units
pallet: 105 units |
| Warranty |
One
year limited warranty |
|
Germ
Eliminators, LLC is not responsible for misuse of its products. |
|
|
2 |
|
|
|
Contact
us today at 757-561-5262 | 804-815-9082 | customerservice@germeliminators.com
to live a healthier lifestyle.
Sporicidin® products are produced according to FDA "Good
Manufacturing Practices." |
|
